Wadkin dust extraction mods
Saturday, December 16, 2006
›
Side view of box showing shaping for 45 deg setting
Friday, December 15, 2006
Side view with motor fully up
›
Side view of saw before refitting the table which is held on by 4 "5/8 whitworth nuts.
top view showing outlet undet trunion
›
Overhead view of the internals showing the dust box fitted.
Tight clearance with motor full down
›
The 2" stainless pipe only just clears with the motor in its fully down position. The grey angle connector and 60mm flexible pipe are ...
dust box fixing holes
›
The two holes at the left hand side use the original deflector plate "1/4 whit fixing bolts. The right hand bracket requires drilling ...
Dust collection box cut away for 45 deg
›
Shaping of the box is critical in order to have clearance when the arbour is set at 45 deg.
Home
View web version